Ancor Marine Grade Products 8 AWG Heat Shrink Butt Connectors 25 Pack

#ad
Marinco Electrical Group 309325 #ad - Tinned for corrosion resistance. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Brazed seam for maximum strength. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Pure copper for maximum current flow. Ul listed and csa recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing.

#ad



Ancor Marine Grade Products 8 AWG Heat Shrink Ring Terminals 25 Pack, 1/4"

#ad
Marinco Electrical Group 321425 #ad - Ancor Marine Grade Products 8 AWG Heat Shrink Ring Terminals 25 Pack, 1/4" #ad - When heated, these connectors form a water tight seal and the ultimate vibration and strain relief. Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. Tinned for corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and csa recognized. Brazed seam for maximum strength.

#ad



Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 25 Pack

#ad
Marinco Electrical Group 320825 #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Ancor heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing. Pure copper for maximum current flow. Ul 310 and cSA recognized. Tinned for corrosion resistance, Pure copper for maximum current flow.

25 pack of 12-10 awG female heat shrink disconnects. Brazed seam for maximum strength. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ul listed and csa recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. When heated, these connectors form a water tight seal and the ultimate vibration and strain relief.

Ancor Marine Grade Products 12-10 AWG Heat Shrink Female Disconnects 25 Pack #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance.

#ad



Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG

#ad
Ancor Marine Grade Products 111502 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Tinned for corrosion resistance, Pure copper for maximum current flow. The ancor marinco electrical group battery cable is the perfect wiring accessory that you need to always keep in your ever growing boating tool kit. Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

Shrinks to form a water tight seal and the ultimate vibration and strain relief. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Heat activated adhesive built into the sleeve of the heat shrink tubing. Heat activated adhesive built into the sleeve of the heat shrink tubing.

Ancor Marine Grade Primary Wire and Battery Cable Red, 25 Feet, 8 AWG #ad - Ul listed and csa recognized. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. 25 pack of 12-10 awG female heat shrink disconnects. Ul 310 and cSA recognized. Tinned for corrosion resistance. Brazed seam for maximum strength. They are constructed with premium vinyl insulation that is rated at 600 volts, gasoline, battery acid, oil, heat, 105 deg C dry and 75 deg C wet, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

#ad



Ancor Marine Grade Duplex Cables

#ad
Ancor 121310 #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation.25 pack of 12-10 awG female heat shrink disconnects. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

. Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Brazed seam for maximum strength. Outer jacket is made for easy removal and provides the best abrasion resistance available. Ul listed and csa recognized. Tinned for corrosion resistance. 25 feet of red 8 AWG marine grade wire.

Ancor Marine Grade Duplex Cables #ad - Heat activated adhesive built into the sleeve of the heat shrink tubing. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Pure copper for maximum current flow. They are constructed with premium vinyl insulation that is rated at 600 volts, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, heat, 105 deg C dry and 75 deg C wet, oil, abrasion and ultra-violet radiation.

Manufactured from individual copper strands and tinned to perform in the harshest marine environments.

#ad



Ratcheting Single Crimp

#ad
MARINCO 703010 #ad - Ul 310 and cSA recognized. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Ancor was founded over twenty years ago to solve electrical problems experienced by Mariners as they ventured offshore in large numbers. 4 color-coated cavities for different wire sizes. The premium vinyl insulation is rated at 600 volts, 105 deg c dry and 75 deg C wet, oil, heat, gasoline, battery acid, stays flexible even in extreme cold -40 deg F/C and resists salt water, abrasion and ultra-violet radiation.

Must be fully closed before tool allows itself to open ensuring proper crimp. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. 25 pack of 12-10 awG female heat shrink disconnects. Tinned for corrosion resistance. 25 feet of red 8 AWG marine grade wire. Brazed seam for maximum strength.

Ratcheting Single Crimp #ad - Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. Heat activated adhesive built into the sleeve of the heat shrink tubing. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. When it comes to marine electrical wiring, connectors Also have to be able to stand up to the corrosive ocean environment.

#ad



Ancor 210235 Marine Grade Electrical Nylon Insulated Double Crip Funnel Entry Ring Terminals with Insulation Grip 8-Gauge, Size 5/16 Screw, 25-Pack

#ad
Ancor 210235 #ad - 5/16" screw, 8 awg, 25 pack of Nylon Ring Terminals. Tinned for corrosion resistance, Pure copper for maximum current flow. Heat activated adhesive built into the sleeve of the heat shrink tubing. Tinned copper gives the least electrical resistance but the most corrosion protection. Features:nylon insulated with insulation gripdouble crimp, funnel entryUL 486C WARNING: This product can expose you to chemicals including di2-ethylhexylphthalate dehp which is known to the State of California to cause cancer, birth defects or other reproductive harm.

For more information go to P65Warnings. Ca. Gov. Ratcheting operation with ergonomic handle to prevent hand fatigue. Brazed seam for maximum strength. Tinned for corrosion resistance. Shrinks to form a water tight seal and the ultimate vibration and strain relief. Shrinks to form a water tight seal and the ultimate vibration and strain relief.

Ancor 210235 Marine Grade Electrical Nylon Insulated Double Crip Funnel Entry Ring Terminals with Insulation Grip 8-Gauge, Size 5/16 Screw, 25-Pack #ad - Ul listed and csa recognized. Heat activated adhesive built into the sleeve of the heat shrink tubing. The premium vinyl insulation is rated at 600 volts, stays flexible even in extreme cold -40 deg F/C and resists salt water, gasoline, 105 deg C dry and 75 deg C wet, heat, oil, battery acid, abrasion and ultra-violet radiation.

#ad



Ancor 306648 Marine Grade Electrical Adhesive Lined Heat Shrink Tubing 3/4-Inch Diameter, 48-Inches Long, Red

#ad
Ancor 306648 #ad - Shrinks to form a water tight seal and the ultimate vibration and strain relief. Includes lever to release jaws mid-cycle in the event of incorrect place terminal. Ul listed and csa recognized. 5/16" screw, 8 awg, 25 pack of Nylon Ring Terminals. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection.

Brazed seam for maximum strength. Heat activated adhesive lining provides impervious seal to salt water, acids, oil, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Heat activated adhesive melts and flows under pressure from shrinking to create a seal which resists salt water, salt, oil, gasoline, and other contaminants.

Ancor 306648 Marine Grade Electrical Adhesive Lined Heat Shrink Tubing 3/4-Inch Diameter, 48-Inches Long, Red #ad - Operating temperature range of -40 deg C to 110 deg C. Nylon insulators are easy to crimp and will not split. Tinned for corrosion resistance, Pure copper for maximum current flow. Color: red qty: 1 Tinned for corrosion resistance. Size: 3/4 in. The premium vinyl insulation is rated at 600 volts, 105 deg c dry and 75 deg C wet, heat, stays flexible even in extreme cold -40 deg F/C and resists salt water, oil, gasoline, battery acid, abrasion and ultra-violet radiation.

Must be fully closed before tool allows itself to open ensuring proper crimp.

#ad



Ancor 252234 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 8-Gauge, Size 1/4 Screw, 2-Pack

#ad
Ancor 252234 #ad - Marine grade lugs. Ul listed and csa recognized. Current flow. Strength. Heat activated adhesive built into the sleeve of the heat shrink tubing. Tinned for corrosion resistance & easy soldering. Ratcheting operation with ergonomic handle to prevent hand fatigue. Tinned for corrosion resistance, Pure copper for maximum current flow.

Includes lever to release jaws mid-cycle in the event of incorrect place terminal. Seamless barrel for max. Operating temperature range of -40 deg C to 110 deg C. Tinned for corrosion resistance. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. 2 pack of 8 awg heavy-duty lugs with a 1/4" Screw Size Ring.

Ancor 252234 Marine Grade Electrical Heavy Duty Tinned Copper Lugs 8-Gauge, Size 1/4 Screw, 2-Pack #ad - Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. The premium vinyl insulation is rated at 600 volts, oil, gasoline, stays flexible even in extreme cold -40 deg F/C and resists salt water, heat, battery acid, 105 deg C dry and 75 deg C wet, abrasion and ultra-violet radiation.

Must be fully closed before tool allows itself to open ensuring proper crimp. Cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Seamless barrel design allows for maximum strength when crimped.

#ad



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Sea Systems 5026 #ad - Manufactured from individual copper strands and tinned to perform in the harshest marine environments. Exceeds all ul 1426, us coast guard Charter boat CFR title 46 and ABYC standards. Brazed seam for maximum strength. Heat activated adhesive built into the sleeve of the heat shrink tubing. Manufactured from 100% heavy-duty annealed tinned copper, providing for maximum current flow while resisting corrosion from salt and moisture.

Includes lever to release jaws mid-cycle in the event of incorrect place terminal. Positive distribution bus with #10-32 stud. 5/16" screw, 8 awg, 25 pack of Nylon Ring Terminals. Tinned for corrosion resistance. Cross linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC. Seamless barrel design allows for maximum strength when crimped.

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Tinned for corrosion resistance, Pure copper for maximum current flow. Closed end design seals out moisture so cables stay dry and corrosion free. Ultra-flexible type 3 stranding resists fatigue from vibration and provides added corrosion protection. Ul listed and csa recognized. Package of 1 red 48 in 122 cm long sections with a 3/4 in 19 mm diameter that shrinks to 1/4 in 6.

#ad



Blue Sea Systems MaxiBus 250A BusBar with Four 5/16

#ad
Blue Sea Systems 2127-BSS #ad - Includes lever to release jaws mid-cycle in the event of incorrect place terminal. Closed end design seals out moisture so cables stay dry and corrosion free. Accepts ato and ATC fast acting blade fuses. 4 color-coated cavities for different wire sizes. Can be used for 24-hour circuits. Tinned for corrosion resistance.

Heat activated adhesive lining provides impervious seal to salt water, acids, oil, and sunlight as well as providing strain relief. Highest shrink ratio - shrinks to 1/3 original size. Heat activated adhesive built into the sleeve of the heat shrink tubing. St blade fuse block - 12 circuits with negative bus and cover.

Blue Sea Systems MaxiBus 250A BusBar with Four 5/16 #ad - Ul listed and csa recognized. 25 pack of 12-10 awG female heat shrink disconnects. Continuous rating: 250A AC/DC. Shrinks to form a water tight seal and the ultimate vibration and strain relief. 2 pack of 8 awg heavy-duty lugs with a 1/4" Screw Size Ring. Ul 486c. Ul 486a. Cover satisfies abyc/uscg requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses.

#ad