aFe Power Silver Bullet 46-35002 Jeep Throttle Body Spacer

AFE Filters 46-35002 - Precision machined from 6061-T6 billet aluminum. Silver bullet throttle body spacer is constructed from precision machined T-6061 billet aluminum and is designed using a serrated/helix design that creates turbulence in air flow at the point just prior entry into the engine. Serrated/helix design: The Serrated/Helix combination design creates intake turbulence in the combustion chamber.

. This product is 50-state legal CARB E. O number d-550-11. This turbulence breaks up the fuel which creates a more complete combustion cycle increasing horsepower, torque and improving throttle response. Serrated/helix Combination Design for optimum airflow into the combustion chamber. Eliminates annoying whistle found in helix only throttle body spacers.

This turbulence helps the air/fuel charge burn completely providing increased horsepower, torque and improved throttle response. Longer intake track: adding a silver Bullet Throttle Body spacer lengthens the intake track which helps increasing intake air speed increasing performance and improved throttle response.

aFe Power Silver Bullet 46-35002 Jeep Throttle Body Spacer - Includes all hardware. The serrated/helix combination design also reduces intake whistle that occurs with Helix only designs. T-6061 billet aluminum construction: all silver bullet Throttle Body Spacers are constructed from T-6061 billet aluminum precision machined for light weight, high strength and perfect fit and finish.





K&N 77-1553KP Performance Intake Kit with Polished Tube for Jeep Wrangler JK 3.8L V6 2007 - 2011

K&N 77-1553KP - 77-series intakes have a pol Estimated horsepower gain of 7. 92 hp at 4807 rPM. Lasts up to 100, 000 miles before service is required depending on driving conditions. Easy to install, usually in 90 minutes or less. Built for performance and show utilizing the highest quality components, the K&N 77 Series High-Flow Performance Kit is a free-flowing mandrel-bent aluminum tube induction system designed for Trucks and Sport Utility Vehicles.

Replaces entire factory air intake system. Designed to improve throttle response and engine sound.





2011 - K&N 57-1553 Performance Air Intake Kit for Jeep Wrangler JK 3.8L V6 2007

K&N 57-1553 - Lasts up to 100, 000 miles before service is required depending on driving conditions. Replaces entire factory air intake system. K&n intake systems replace your vehicle's restrictive factory air filter and air intake housing. Easy to install, usually in 90 minutes or less. Estimated horsepower gain of 8. 17 hp at 4807 rPM.

Lasts up to 100, 000 miles before service is required depending on driving conditions. Easy to install, usually in 90 minutes or less. Most fipk's are street legal in all 50 US states and come with a Million Mile Limited Warranty. Replaces entire factory air intake system. Designed to improve throttle response and engine sound.

2011 - K&N 57-1553 Performance Air Intake Kit for Jeep Wrangler JK 3.8L V6 2007 - Designed to improve throttle response and engine sound. Estimated horsepower gain of 7. 92 hp at 4807 rPM. The generation ii fipk is k&n's ultimate performance product, designed to increase power by as much as 10%.





Hi-Lift Jack HK-B Black Handle-Keeper

ARB HK-B - Designed to improve throttle response and engine sound. Molded in black. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Easy to install, usually in 90 minutes or less. Easily slips on and off for quick, no hassle removal when you need to use your jack.

Estimated horsepower gain of 7. 92 hp at 4807 rPM. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Replaces entire factory air intake system.

Hi-Lift Jack HK-B Black Handle-Keeper - Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Replaces entire factory air intake system. Easy to install, usually in 90 minutes or less. Lasts up to 100, 000 miles before service is required depending on driving conditions. Estimated horsepower gain of 8. 17 hp at 4807 rPM.

Designed to improve throttle response and engine sound.





Magnaflow 15160 Stainless Steel Performance Exhaust System Kit, Large

MagnaFlow Exhaust Products 15160 - Designed to improve throttle response and engine sound. Lasts up to 100, 000 miles before service is required depending on driving conditions. Easily slips on and off for quick, no hassle removal when you need to use your jack. Designed to improve throttle response and engine sound. Easy to install, usually in 90 minutes or less.

Mandrel bent tubing. Stainless steel construction. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Dyno-proven power. Magnaflow 15160 stainless steel Performance Exhaust System Kit, Large Estimated horsepower gain of 7. 92 hp at 4807 rPM. Straight through mufflers;Muffler Body Shape : Oval.

Magnaflow 15160 Stainless Steel Performance Exhaust System Kit, Large - Easy to install, usually in 90 minutes or less. Molded in black. Lasts up to 100, 000 miles before service is required depending on driving conditions. Replaces entire factory air intake system. Estimated horsepower gain of 8. 17 hp at 4807 rPM.





aFe Power Momentum GT 75-76203 Jeep Wrangler JK Performance Intake System Oiled, 7-Layer Filter

aFe Power 75-76203 - From the one-piece sealed housing with a tire tread design top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market. Lasts up to 100, 000 miles before service is required depending on driving conditions. Easy to install, usually in 90 minutes or less.

Easy to install, usually in 90 minutes or less. Stainless steel construction. A urethane plug is also included if you wish to completely seal the airbox. Easily slips on and off for quick, no hassle removal when you need to use your jack. Also features a cad designed, dyno tuned roto-molded intake tube and auxiliary air scoop.

aFe Power Momentum GT 75-76203 Jeep Wrangler JK Performance Intake System Oiled, 7-Layer Filter - Estimated horsepower gain of 8. 17 hp at 4807 rPM. Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Premium hardware: a premium stainless steel T-bolt clamp and a urethane coupler are used for strength and durability while also providing the most secure installation available.

The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Torque.





K&N 33-2364 High Performance Replacement Air Filter for 2007-2016 Jeep Wrangler JK 3.6L V6

K&N 33-2364 - Straight through mufflers;Muffler Body Shape : Oval. High air flow with exceptional filtration. Molded in black. Designed to boost horsepower and rate of acceleration. With most vehicles you simply remove the disposable air filter and replace it with a K&N. Dyno-proven power. Stainless steel construction. Designed to improve throttle response and engine sound.

K&n's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED. Estimated horsepower gain of 8.

K&N 33-2364 High Performance Replacement Air Filter for 2007-2016 Jeep Wrangler JK 3.6L V6 - 17 hp at 4807 rPM. Works with original equipment manufacturer vehicle electronics. Easily slips on and off for quick, no hassle removal when you need to use your jack. Mandrel bent tubing. Can be cleaned and used again. Lasts up to 50, 000 miles before cleaning is required depending on driving conditions. Produces an additional 11 horsepower and 12 lbs.





Bestop 42640-01 HighRock 4x4 Under Seat Lock Box for 2007-2018 Wrangler JK, Driver side Does not fit 2011-2018 Wrangler JK 2-Door models

Bestop 42640-01 - Also features a cad designed, dyno tuned roto-molded intake tube and auxiliary air scoop. Estimated horsepower gain of 8. 17 hp at 4807 rPM. 1-year Limited Warranty. Designed to improve throttle response and engine sound. Exterior dimensions: 17" long, 7. 5" wide, 3. 75" high. Patent. Replaces entire factory air intake system.

Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Estimated horsepower gain of 7. 92 hp at 4807 rPM. Works with original equipment manufacturer vehicle electronics. Interior storage space is 16 inches x 5-3/4 inches x 2-7/8 inches. Replaces entire factory air intake system.

Bestop 42640-01 HighRock 4x4 Under Seat Lock Box for 2007-2018 Wrangler JK, Driver side Does not fit 2011-2018 Wrangler JK 2-Door models - Note: does not fit 2011-current Wrangler 2 door models. Easy to install, usually in 90 minutes or less. It is custom designed to fit under seat and comes with pick resistant lock and two keys. Molded in black. Mandrel bent tubing.





Superchips 3874 Flashpaq F5 Programmer

Superchips 3874 - Lasts up to 100, 000 miles before service is required depending on driving conditions. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material.

Lasts up to 100, 000 miles before service is required depending on driving conditions. High air flow with exceptional filtration. Will not fot 2011-up Wrangler 2-door models. Interior space is 16" long, 5. 75" wide x 2. 78" high. Fits 07-10 wrangler jk 2 doorwithout modification; fits 11-12 Wrangler JK Unlimited with some minor install modifications; will not fit 11-12 Wrangler JK 2-door.

Superchips 3874 Flashpaq F5 Programmer - Stainless steel construction. Patent. Provides lockable hidden storage space underneath driver seat with pick-resistant cylinder lock and two keys. Designed to improve throttle response and engine sound. Replaces entire factory air intake system. Easy to install, usually in 90 minutes or less.





Lisle 38350 Exhaust Hanger Removal Pliers

Lisle 38350 - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Lasts up to 100, 000 miles before service is required depending on driving conditions.

Replaces entire factory air intake system. 7-layer oiled, washable media with 5 layers of progressively finer cotton gauze and 2 layers of synthetic material for high-performance air flow with maximum filtration efficiency, the only filtration media of its kind to be granted a U. S. The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.

Lisle 38350 Exhaust Hanger Removal Pliers - Lasts up to 100, 000 miles before service is required depending on driving conditions. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier. High air flow with exceptional filtration. Will not fot 2011-up Wrangler 2-door models.

Easily slips on and off for quick, no hassle removal when you need to use your jack. This tool separates the rubber supports from exhaust hanger brackets. Exterior dimensions: 17" long, 7.





Hooke Road Matte Black Clip-in Front Grille Mesh Inserts for 2007-2015 Jeep JK Wrangler & Wrangler Unlimited Pack of 7

Hooke Road LED-037 - 7-layer oiled, washable media with 5 layers of progressively finer cotton gauze and 2 layers of synthetic material for high-performance air flow with maximum filtration efficiency, the only filtration media of its kind to be granted a U. S. Produces an additional 11 horsepower and 12 lbs. Bolt-in installation using factory seat riser bolts; no other hardware needed.

At hooke road our goal is to make your Jeeping experience the absolute best that it could be. Lasts up to 100, 000 miles before service is required depending on driving conditions. Will not fot 2011-up Wrangler 2-door models. Straight through mufflers;Muffler Body Shape : Oval. Note: this set of grille inserts won't directly fit any special editions like 75th anniversary that already have inserts.

Hooke Road Matte Black Clip-in Front Grille Mesh Inserts for 2007-2015 Jeep JK Wrangler & Wrangler Unlimited Pack of 7 - Installation tips: pop the upper grille lock pins so you can access the grille from behind. Provides lockable hidden storage space underneath driver seat with pick-resistant cylinder lock and two keys. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. For 1998-2006 4.

0l jeep wrangler TJ Models. Replaces entire factory air intake system.